Catalog, fall 1966 - Signetics Integrated Circuits:

/

811 EAST ARQ

RATED CIRCU

AVENUE, SUNNYVALE, CALIFORNIA

•4

SIGNETICS PRODU

MILITARY PRODUCT LINES

APPLICATION

DESCRIPTION

ULTRA HIGH RELIABILITY
AEROSPACE
-55° C to +125° C

RE100K

RE100G

RE100J

UTILOGIC

1.

LOW POWER
TTL

RE400J

LINEAR

RE500K

RE500G

HIGH SPEED
TTL

RE800J

HIGH SPEED
LOW POWER
TTL

R8000J

ARRAYS

MILITARY AIRBORNE
-55° C to +125° C

MILITARY PROTOTYPE,
GSE

-0° C to +70° C

GSE, DUAL-IN-LINE
PACKAGE
0°C to +70° C

FEATURES

SEE PAGE REFERENCED
FOR FURTHER
INFORMATION

SE100K

SE100G

NE100K

SE100J

NE100G

SE400J

NE100J

SU300K*

SU300G*

NE400J

NE100A

NE400A

LONGEST ESTABLISHED RELIABILITY
BEST SPEED/NOISE MARGIN/POWER TRADE OFF

PAGES 4 AND 5

BEST DC NOISE MARGINS
HIGH CAPACITANCE DRIVE

LESS THAN
5 mW/GATE,
DUAL BINARY,
ACTIVE PULL-UP
AND PULL-DOWN

PAGE 8

*-20° C to +85° C

PAGE 5

SE500K

SE500G

NE500K

SE800J

NE500G

S8000J

NE800J

WIDE SELECTION
OF GAIN-BANDWIDTH
PRODUCT

PAGE 12

NE800A

S1200A

DUAL 30 MHz
BINARY,

10ns GATE
DELAYS,

ACTIVE PULL-UP
AND PULL-DOWN

HIGH AC NOISE
IMMUNITY,
DUAL BINARY

MULTI FUNCTION
SUBSYSTEMS

PAGE 7

PAGE 8

PAGE 12

COMMERCIAL / INDUSTRIAL PRODUCT LINES

APPLICATION

DESCRIPTION

INDUSTRIAL
0°C to +70° C
TO-5 and FLAT PACK

INDUSTRIAL
0°C to +70° C
DUAL-IN-LINE PACKAGE

INDUSTRIAL
DUAL-IN-LINE PACKAGE
0°C to +70° C

COMMERCIAL
+ 15° C to +55° C

FEATURES

NE100K

NE100G

NE100J

NE100A

UTILOGIC

SU300K 5

BEST SPEED/NOISE MARGIN/POWER TRADE-OFF
PROVEN RELIABILITY

SU300G*

LOW POWER
TTL

NE400J

LINEAR

NE400A

LU300K

BEST DC NOISE MARGINS
HIGH CAPACITANCE DRIVE

ST400A

SP400A

LOWEST POWER
HIGH

CAPACITANCE

DRIVE

NE500K

WIDE SELECTION
OF GAIN-BANDWIDTH
PRODUCT

PLUG-IN

DTL

HIGH SPEED
TTL

NE800J

NE800A

ST600A

SP600A

LOW COST

ST800A

SP800A

HIGHEST SPEED
HIGH

CAPACITANCE

DRIVE

ARRAYS

S1200A

MULTIFUNCTION

SUBSYSTEMS

SEE PAGE REFERENCED
FOR FURTHER
INFORMATION

PAGE 5

PAGE 8

*-20° C to +85° C

PAGE 6

PAGE 12

PAGE 5

PAGE 7

PAGE 12

2

HOW TO USE THIS CATALOG

This catalog is designed as a quick reference
source on Signetics digital and linear product lines.
Its primary purpose is to provide the integrated
circuit user with no more than the salient features
of each element, including a few typical perfor¬
mance characteristics, schematics, power supply
requirements, packaging, operating temperature
range, and primary area of application. Once the
reader has found the circuit family or families
most likely to meet his needs, he may obtain
detailed design data sheets and supporting appli¬
cation data for his selection through his nearest
Signetics representative or distributor listed on
the back cover.

The catalog is organized first by logic type, DTL,
TTL, UTILOGIC, and is broken down within each
type to reflect operating temperature range and
application. There are no hard and fast rules that
distinguish the so-called military types from indus¬
trial or commercial types, but operating tempera¬
ture is generally used as a benchmark. Circuits
operating from -55°C to +125°C are classified
as military and are backed by worst-case specifi¬
cations on their data sheets. There are circuits in
the 0°C to +70°C range that are suitable for either
military or industrial applications. Circuit types
in the 0°C to +70°C range with NE prefixes are
specified more tightly than those with ST prefixes,
which operate in the same range. This may not

be apparent from a review of the typical charac¬
teristics tabulated in this catalog. However, for
the thoughtful systems designer a comparison of
the data sheets for NE and ST types will show the
differences in performance guarantees on which
a proper choice can be made. It should be noted
that the performance guarantees for ST types are
identical to those for SP types except for the opera¬
ting temperature range. Elements bearing an SP
prefix operate in the +15°C to +55°C range and
are designated as “commercial."

CONTENTS

DTL CIRCUITS

100-Series

4

600-Series

5

TTL CIRCUITS

400-Series

5

800-Series

7

8000-Series

8

UTILOGIC

300-Series

8

SIGNETICS PACKAGES

9

REFERENCE DIGITAL SCHEMATICS

10

MONOLITHIC SUBSYSTEMS

1200-Series

12

LINEAR CIRCUITS

500-Series

12

SIGNETICS SURE PROGRAM

13

3

- -.— ■ ' ■

C

RECOMMENDED
POWER SUPPLY
+4.0 V,-2.0 V

DT

1

MILITARY
-55° C to +125 c

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function

(mW)

50% Duty

DC

NOISE

MARGIN

(V)

SE101

4 INPUT NAND GATE

5

35

10

1.0

G, K

1,3,6

1

SE102

3-INPUT NAND GATE

5

35

10

1.0

G,K

1,3,6

1

SE105

6-INPUT GATE EXPANDER

-

-

—

—

G, K

3,6

SEllO

3-INPUT HIGH FAN-OUT NAND GATE

15

20

34

1.0

G, K

1,6

SE113

DUAL 3-INPUT HIGH FAN-OUT NAND GATE

15

20

34

1.0

G, K

2,6

SE115

DUAL 2-INPUT NAND GATE

5

35

10

1.0

G, K

3,6

SE124

RST BINARY ELEMENT

8

18 MHz

28

1.0

G, J, K

5,6

2

SE150

2-INPUT CLOCK/CAPACITIVE LINE DRIVER

20

35

36

1.0

G, K

4,6

SE157

DUAL 3-INPUT CLOCK/CAPACITIVE LINE DRIVER

i 15

20

34

1.0

K

4,6

SE160

ONE-SHOT MULTIVIBRATOR

4

—

32

—

1.0

G, K

1,6

SE161

f ONE-SHOT MULTIVIBRATOR

5

—

40

1.0

J,K

6

SE181

QUADRUPLE INVERTER

5

25

15

1.0

K

2,6

CS700

DUAL 3-2-INPUT NAND GATE

5

35

10

1.0

G, K

6

CS701

DUAL3-2-INPUT NAND GATE

5

35

10

1.0

G, K

2,6

CS704

RST BINARY ELEMENT

8

18 MHz

16

1.0

G, K

5

CS705

DUAL 3-INPUT AND GATE

—

3

5

1.0

G, K

3

. CS709

DUAL 3-INPUT GATE EXPANDER

—

-

—

—

G, K

CS715

DUAL 2-INPUT CLOCK/CAPACITIVE LINE DRIVER

I 15

35

35

1.0

K

1

CS716

DUAL 2-INPUT HIGH FAN-OUT NAND GATE

15

35

35 ..

1.0

K

1

DT

1

MILITARY

-55° C to +125° C

RECOMMENDED
POWER SUPPLY

4.0 V

—

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function
50% Duty
(mW)

DC

NOISE

MARGIN

(V)

SE106

DUAL 5-INPUT GATE EXPANDER

—

—

—

—

J

SElll

DUAL 4-INPUT HIGH FAN-OUT NAND GATE

19

20

34

1.0

J

2

1 SE112

DUAL 3-INPUT HIGH FAN-OUT NAND GATE

19

20

34

1.0

J

1

SE116

DUAL 4-INPUT NAND GATE

6

25

15

1.0

J

1

3

SE124

RST BINARY ELEMENT

7

18 MHz

28

1.0

J

5

2

SE125

J-K BINARY ELEMENT

8

12 MHz

40

1.0

J

5

4

SE155

DUAL 4-INPUT CLOCK/CAPACITIVE LINE DRIVER

19

20

34

1.0

J

4

SE156

DUAL 4-INPUT CLOCK/CAPACITIVE LINE DRIVER

19

20

34

1.0

J

1,4

SE161

ONE-SHOT MULTIVIBRATOR

4

—

51

1.0

J

6

SE170

TRIPLE 3-INPUT NAND GATE

6

25

15

1.0

J

2

3

SE180

QUADRUPLE 2-INPUT NAND GATE

6

25

15

1.0

J

2

3

CS720

QUADRUPLE 2-IN PUT NAND GATE

6

25

14

1.0

J

3

CS721

TRIPLE 3-INPUT NAND GATE

6

25

14

1.0

J

3

CS727

TRIPLE 2-INPUT NAND GATE

6

25

15

1.0

J

1,2

3

CS729

RST BINARY ELEMENT

7

18 MHz

28

1.0

J

5

8

CS730

DUAL 5-INPUT NAND GATE

6

25

15

1.0

J

2

3

CS731

QUADRUPLE 2-INPUT GATE EXPANDER

—

—

—

—

J

: CS732

12-INPUT GATE EXPANDER

—

—

—

—

J

4

DTL

MILITARY
0° C to +70° C

RECOMMENDED
POWER SUPPLY

4.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

[.

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function
50% Duty
(mW)

DC

NOISE

MARGIN

(V)

NE106

DUAL 5-INPUT GATE EXPANDER

—

—

—

—

A,J

N El 12

DUAL 3-INPUT HIGH FAN-OUT NAND GATE

19

20

34

1.0

AJ

1

N El 16

DUAL 4-INPUT NAND GATE

6

25

15

1.0

A,J

1

3 j

NE124

RST BINARY ELEMENT

7

18 MHz

28

1.0

AJ

5

2

NE125

J-K BINARY ELEMENT

8

12 MHz

40

1.0

AJ

5

4 1

NE156

DUAL 4-INPUT CLOCK/CAPACITIVE LINE DRIVER

19

20

34

1.0

AJ

1,4

5

NE161

ONE-SHOT MULTIVIBRATOR

4

—

51

1.0

AJ

•

6 !

NE170

TRIPLE 3-INPUT NAND GATE

6

25

15

1.0

AJ

2

i 3 *

o

CO

t-H

LU

QUADRUPLE 2-INPUT NAND GATE

6

25

15

1.0

A, J

2

3 !

commercial/industrial

+ 15° C to +55° C

RECOMMENDED
POWER SUPPLY

4.5 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

DC

NOISE

MARGIN

(V)

Function

Function
50% Duty
(mW)

SP616

DUAL 4-INPUT NAND GATE

5

30

34

1.0

A

7

3

SP620

J-K BINARY ELEMENT

5

5 MHz

28

1.0

A

7

7

SP629

RST BINARY ELEMENT

5

10 MHz

40

1.0

A

7

8

SP631

QUADRUPLE 2-INPUT GATE EXPANDER

_

_

_

_

A

7

SP659

DUAL 3-INPUT BUFFER/DRIVER

12

25

34

1.0

A

7

SP670

TRIPLE 3-INPUT NAND GATE

5

30

15

1.0

A

7

3

SP680

QUADRUPLE 2-INPUT NAND GATE

5

30

15

1.0

A

7

3

RECOMMENDED
POWER SUPPLY

4.0 V

T1

L

LOW POWER MILITARY
-55° C to +125° C

—

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function

(mW)

50% Duty

DC

NOISE

MARGIN

(V)

SE416

DUAL 4-INPUT NAND GATE

7

30

4.5

1.0

J

1,4

9

SE417

DUAL 3-INPUT NAND GATE

7

32

4.5

1.0

J

1,3

10

SE424

DUAL AC BINARY ELEMENT

7

9 MHz

9.0

1.0

J

4,5

11

SE440

DUAL AND/OR/INVERT GATE

7

23

4.5

1.0

J

4

SE455

DUAL 4-INPUT BUFFER/DRIVER

20

25

7.0

1.0

J

4

SE480

QUADRUPLE 2-INPUT NAND GATE

. 7

23

3.5

1.0

J

4

12

5

LOW POWER MILITARY

0° C to +70° C

RECOMMENDED
POWER SUPPLY

4.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

| i

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

DC

NOISE

MARGIN

(V)

Function

(mW)

50% Duty

NE416

DUAL 4-INPUT NAND GATE

7

32

5.0

1.0

J

1,4

9

NE417

DUAL 3-INPUT NAND GATE

7

35

4.5

1.0

J

1,3

10

NE424

DUAL AC BINARY ELEMENT

7

9 MHz

9.0

1.0

J

4,5

11

NE440

DUAL AND/OR/INVERT GATE

7

25

4.5

1.0

J

4 .

NE455

DUAL 4-INPUT BUFFER/DRIVER

20

29

7.0

1.0

J

4

NE480

QUADRUPLE 2-INPUT NAND GATE

7

25

3.5

1.0

J

4

12

LOW POWER MILITARY
0° C to +70° C

RECOMMENDED
POWER SUPPLY
5.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

DC

NOISE

MARGIN

(V)

Function
50% Duty
(mW)

NE416

DUAL 4-INPUT NAND GATE

7

32

9.0

1.0

A

1,4

9

NE417

DUAL 3-INPUT NAND GATE

7

35

8.0

1.0

A.

1,3

10

NE424

DUAL AC BINARY ELEMENT

7

9 MHz

14 .

1.0

L.

A

4,5

11

NE440

DUAL AND/OR/INVERT GATE

7

25

10

1.0

A

4

NE455

DUAL 4-INPUT BUFFER/DRIVER

24

29

12

1.0

A

4

NE480

QUADRUPLE 2-INPUT NAND GATE 7

25

9.0

1.0

A

4

12

RECOMMENDED
POWER SUPPLY

5.0 V

TT| LOW POWER COMMERCIAL/

■ ■ ■- INDUSTRIAL+15° C to +55° 1

C

-— — --- — —r - - —

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

DC

NOISE

MARGIN

(V)

Function

(mW)

50% Duty

SP416

DUAL 4 INPUT NAND GATE 1

7

40

12

1.0

A

1,4,7

9

SP417

DUAL 3-INPUT NAND GATE

7

40

12

1.0

A

1,3,7

10

SP424

DUAL AC BINARY ELEMENT

7

9 MHz

22

1.0

A

4,5,7

11

SP440

DUAL AND/OR/INVERT GATE

7

45

18

1.0

A

4,7

SP455

DUAL 4-INPUT BUFFER/DRIVER

24

45

16

1.0

A

4,7

SP480

QUADRUPLE 2-INPUT NAND GATE

7

40

9.0

1.0

A

4,7

12

6

HIGH SPEED MILITARY
-55° C to +125° C

RECOMMENDED
POWER SUPPLY
5.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES
SEE
PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function

(mW)

50% Duty

DC

NOISE

MARGIN

(V)

SE806

DUAL 4-INPUT EXPANDER

—

—

—

—

J

SE808

8-INPUT NAND GATE

10

10

20

1.0

J

4

SE816

DUAL 4-INPUT NAND GATE

10

10

20

1.0

J

4

13

SE825

DC CLOCKED J-K BINARY ELEMENT

10

20 MHz

70

1.0

J

5

14

SE826

DUAL J-K BINARY ELEMENT

5

30 MHz

35

1.0

J

5

15

SE840

DUAL 4-INPUT EXCLUSIVE-OR GATE

10

10

25

1.0

J

1,4

SE855

DUAL 4-INPUT POWER GATE

30

10

25

1.0

J

4

SE870

TRIPLE 3-INPUT POWER GATE

10

10

20

1.0

J

4

SE880

QUADRUPLE 2-INPUT NAND GATE

10

10

20

1.0

J

4

HIGH SPEED MILITARY
0° C to +70° C

RECOMMENDED
POWER SUPPLY

5.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function
50% Duty
(mW)

DC

NOISE

MARGIN

(V)

Function

NE806

DUAL 4-INPUT EXPANDER

—

—

—

—

A, J

NE808

8-INPUT NAND GATE

10

13

20

1.0

AJ

4

NE816

DUAL 4-INPUT NAND GATE

10

13

20

1.0

. A,j.

4

13

NE825

DC CLOCKED J-K BINARY ELEMENT

10

20 MHz

70

1.0

A, J

5

14

NE826

DUAL J-K BINARY ELEMENT

5

30 MHz,

35

1.0

AJ

5

15

NE840

DUAL 4-INPUT EXCLUSIVE-OR GATE

10

13

25

1.0

AJ

1,4

NE855

DUAL 4-INPUT POWER GATE

30

13

25

1.0

AJ

4

NE870

TRIPLE 3-INPUT POWER GATE

10

13

20

1.0

AJ

4

NE880

QUADRUPLE 2-INPUT NAND GATE

10

13

20

1.0

AJ

4

RECOMMENDED
POWER SUPPLY
5.0 V

T1

FL

HIGH SPEED COMMERCIAL/
INDUSTRIAL +15° C to + 55° 1

C

-— — —-—— w - — — — — — — —-

TYPE

NUMBER

DESCRIPTION

FAN-OUT

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

Tpd

(ns)

AVG. PWR.

Function

(mW)

50% Duty

DC

NOISE

MARGIN

(V)

Function

SP806

DUAL 4-INPUT EXPANDER

—

—

-

—

A

7

SP808

8-INPUT NAND GATE

.

8

20

25

1.0

A

4,7

SP816

DUAL 4-INPUT NAND GATE

8

20

— !

1.0

A

4,7

13

SP825

DC CLOCKED J-K BINARY ELEMENT

8

20 MHz

135

1.0

A

5,7

14

SP826

DUAL J-K BINARY ELEMENT

4

30 MHz

40

1.0

A

5,7

15

SP840

DUAL 4-INPUT EXCLUSIVE-OR GATE

8

20

30

1.0

A

1,4,7

SP855

DUAL 4-INPUT POWER GATE

24

20

45

1.0

A

4,7

SP870

TRIPLE 3-INPUT POWER GATE

8

20

25

1.0

A

4,7

SP880

QUADRUPLE 2-INPUT NAND GATE

8

20

25

1.0

A 4,7

7

MILITARY HIGH SPEED AND
LOW POWER,— 55° C to +125° C

RECOMMENDED
POWER SUPPLY

5.0 V

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERISTICS

PACKAGE

TYPE

NOTES

SEE

PAGE 8

SCHEMATIC
REFERENCE ,

Tpd

(ns)

AVG. PWR.

Function

(mW)

50% Duty

DC

NOISE

MARGIN

(V)

S8416

DUAL 4-INPUT NAND GATE

7

35

4.5

1.0

J

1,4

9

S8417

DUAL 3-INPUT NAND GATE

7

50

4.5

1.0

J

1,3

10

S8424

DUAL AC BINARY ELEMENT

7

9 MHz

9.0

1.0

J

4,5

11

| S8440

DUAL EXCLUSIVE-OR GATE

7

25

4.5

1.0

J

4

S8455

DUAL 4-INPUT BUFFER/DRIVER

20

28

7.0

1.0

J

4 -

S8480

QUADRUPLE 4-INPUT NAND GATE

7

25

3.5

1.0

J

4

12

S8806

DUAL 4-INPUT EXPANDER

—

—

—

—

J

—

S8808

8-INPUT NAND GATE

10

12

20

1.0

J

4

S8816

DUAL 4-INPUT NAND GATE

10

12

20

1.0

J

4

13

S8825

DC CLOCKED J-K BINARY ELEMENT

10

20 MHz

70

1.0

J

5

14

S8826

DUAL J-K BINARY ELEMENT

10

30 MHz

35

1.0

J

5

15

S8840

DUAL 4-INPUT EXCLUSIVE-OR GATE

10

12

25

1.0

J

1,4

S8855

DUAL 4-INPUT POWER GATE

26

12

25

1.0

J

4

S8870

TRIPLE 3-INPUT NAND GATE

10

12

20

1.0

J

4

S8880

QUADRUPLE 2-INPUT NAND GATE

10

12

20

1.0

J

4

IDUS-
i° C

.

RECOMMENDED
POWER SUPPLY
4.5 V

U1

ILOGIC

MILITARY GSE AND IN
TRIAL-20° C to +8E

TYPE

NUMBER

DESCRIPTION

FAN-OUT

Function

TYPICAL CHARACTERIST

ICS

NOTES

SEE

PAGE 8

SCHEMATIC

REFERENCE

A!

Tpd 1

(ns) 5

/G. PWR.

Function N(
0% Duty MA
(mW) <

PACKAGE
USE TYPE

RGIN

:v>

SU300

DUAL 3-INPUT GATE EXPANDER

—

—

G, K

8

SU305

6-INPUT AND GATE

10

25

5

G, K

8

SU306

DUAL 3-INPUT AND GATE

10

25

5

G, K

8

16

SU314

7-INPUT NOR GATE

17

30

18 1.

2 G, K

8

SU315

DUAL 3-INPUT NOR GATE

17

30

18 1.

2 G, K

8

SU316

DUAL 2-INPUT NOR GATE

17

30

18 1

2 G, K

1,8

17

SU320

J-K BINARY ELEMENT

17

4 MHz

90 1

.2 G, K

5,8

l

j SU331

DUAL 2-INPUT OR GATE

17

30

36 1

2 G, K

1,8

SU332

DUAL 3-INPUT OR GATE

17

30

36 1

.2 G, K

8

18 J

NOTES

(1) Fan-in expansion provision.

(5) Figure in Tpd column is toggle rate.

(2) Has internally connected pull-up resistor. Collector logic permissible.

(6) Also available for 0°C to 70°C operation. Specify prefix NE instead of SE.

(3) Has internal pull-up resistor that may be connected at user’s option. For

(7) Also available for 0°C to 70°C operation. Specify prefix ST instead of SP.

collector logic, at least one pull-up per array must be connected.

(8) Also available for -f-10°C to +55°C operation in K package only.

(4) Active pull-up. Do not use collector logic.

Specify prefix LU instead of SU.

8

PACKAGES

Outline drawings of the packages used for Sig-
netics products are provided below. For each of
these packages, Signetics has designed a protec¬
tive carrier that may be used in testing, handling,
shipping, and storage. The mechanical and envi¬

ronmental requirements imposed on these pack¬
ages are covered in the discussion of the Signetics
SURE Program at the back of this catalog. The
carriers and their relationship to various test
heads or test contactors is illustrated below.

OUTLINE DRAWINGS

J-PACKAGE-(TO-88)
(MODULAR GLASS - KOVAR)

G-PACKAGE-(TO-91)
(MODULAR GLASS - KOVAR)

K-PACKAGE—(TO-100)
(MODIFIED JEDEC TO - 5)

A-PACKAGE

.0501.005
NOTE 5

IT 028 NOTE 6
1 .013 REF

325

.019

015

TYP

030

020

063

051

065

.051

h-.030 TYP
NOTE I -H

(SIDE VIEW)

020 TYP
NOTE 6

.0501 .005
NOTE 5

.038 NOTE 6
012 REF
006
004

.027

006

.0 0 D 0 0-

370.

INSULATOR

045

£015

10 LEADS
019
016

DIA-

355*

(SIDE VIEW)

020 TYP
NOTE 6

NOTES: (SIDE VIEW)

(1) Recommended minimum offset before lead bend.

(2) All leads weldable and solderable.

(3) Pin 1 internally connected to case.

(4) All dimensions in inches.

(5) Tolerances are non-cumulative. 0 34_/^

(6) Lead spacing dimensions apply to this area only. 028 "V

(7) Signetics symbol on flat package locates lead No. 1. (bottom view)

NOTE 1

NOTES (A Package only)

1. Lead spacing shall be measured
within this zone.

2. Epoxy Body.

3. Kovar Leads.

4. Lead spacing tolerances are
non-cumulative.

PACKAGE CARRIERS

m

iowd&mM m

m - r-v 1 '

,:MB

■

W : ¥- ■- .

^ ^■

■

■

.

Y-f ^ mk $ “Mw m ' v

V"- '' ,

K-PACKAGE

.

.

■rl

*i

. . . ■ - ■: ' * W

.

. ■ ■ - ■ ■ i; ■ . <.

mmmmm

■»■■

■ •

:-:S«e8S«?Swcv:’

G-PACKAGE

J-PACKAGE

I

w

A-PACKAGE

K PACKAGE TEST HEAD

G AND J PACKAGE TEST HEAD

A PACKAGE TEST HEAD

9

10

11

H

The Signetics 1280 and 1281 are four-bit
monolithic subsystems in convenient dual in-line
packages. Both can be used as either counting or
storage elements. The 1280 Decade Counter will
divide by 2, 5, or 10 and provides either BCD or
square wave outputs. The 1281 Binary Counter
will divide by 2 , 4, 8, or 16. Both counters have
provisions for full decoding. Either of the counters

may be used in cascade, and both offer the follow¬
ing features for greatest versatility.

• Counting Rate 20 MHz

• Power Consumption 100 mW

• Operating Temperature 0°C to 70° C

• Optional BCD or Biquinary Outputs

• TTL and DTL Logic Compatibility

• Strobed Single-Ended Inputs

• Common Clear Line

1280 DECADE COUNTER/STORAGE REGISTER 1281 BINARY COUNTER/STORAGE REGISTER

LINEAR FUNCTION SET

Signetics linear amplifiers provide all of the most
frequently required circuit functions over a broad
spectrum of gain and bandwidth combinations.

Available in two operating ranges: -55°C to
+125°C and 0°C to +70°C.

518 ANALOG COMPARATOR

505 SMALL SIGNAL DIFFERENTIAL AMPLIFIER

• Strobe Control

• Response time 55ns
10 msec overdrive

• Output Voltage Swing +5.1 V

-1.4 V

• Differential Input Impedance 300012

• Differential Input and Output

• Gain Bandwidth Product 2.5 GHz

• Common Mode Rejection 95 db min

• Input Common Mode Range ±1.0 V

• Power Dissipation 100 mW

506 DIFFERENTIAL AMPLIFIER

501 RF/VIDEO/PULSE AMPLIFIER

• Open Loop Voltage Gain 18,000

• Differential Input Impedance 200,00012

• Output Voltage Swing ±11 Volts

• Common Mode Rejection Ratio 90 db

• Externally Variable Gain-Bandwidth
Characteristics

• Noise Figure 5.5 db typ @ 100 KHz

• Gain Stability vs Temperature ±1.0 db max

• Low Power Drain 25 mw max

12

SIGNETICS SURE PROGRAM

SIGNETICS SURE PROGRAM

The Signetics SURE" Program consists of a combination of 100%
and statistical sample tests designed to assure specified performance,
continuing uniformity, and long term reliability in Signetics products.

These tests are made regularly at no extra cost to the user and are
performed in addition to the 17 quality assurance inspections and
tests to which every circuit is subjected before final seal. The tests,
tabulated below for the specifier’s convenience, are performed in
accordance with the following conditions, sequence, and schedules
on equipment calibrated to meet all requirements of MIL-Q-9858A
and MIL-C-45662A.

One hundred per cent Production Screening (Table I) includes
Thermal Shock, Centrifuge, and Hermeticity preceding Final Electrical
Tests. Every circuit in every lot submitted for Quality Assurance
Acceptance Testing must pass this screening series.

Every production lot of every circuit type is subject to the Group
A tests outlined in Table II. All details of the sampling plans used
for lot acceptance conform with MIL-STD-105D.

TABLE I — 100% PRODUCTION SCREEN TESTS

Thermal Shock: 5 cycles; 60 sec. at 0°C, 60 sec. at 100°C. Centrifuge: y, axis; 30,000 g. min. Hermeticity: Gross leak test

Above series performed prior to FINAL ELECTRICAL TESTS

TABLE II —GROUP A, PRODUCT ACCEPTANCE TESTS

SUB¬

GROUP

TEST

CONDITIONS

LIMITS

AQL

INSPECTION

LEVEL

A-l

Visual and Mechanical Inspection

Per MIL-STD-750, Method 2071

1.0%

11

A-2

DC Parameters

T=+25°C; Note 1

Note 2

1.0%

11

A-3

DC Parameters

T=-f25°C; Notes 1, 3

Note 2

1.0%

II

A-4

DC Parameters

T=-f 125°C; Note 1

Note 2

1.0%

11

A-5

DC Parameters

T=—55°C; Note 1

Note 2

1.0%

II

A-6

AC Parameters

T=+25°C; Note 1

Note 2

1.0%

11

TABLE III —GROUP B, ENVIRONMENTAL TESTS PER MIL-S-19500D AND MIL-STD-750A

SUB¬

GROUP

TEST

CONDITIONS

MIL-STD-750

METHOD

LIMITS

LTPD

MAX. ACCEPTANCE
NUMBER

B-l

Physical Dimensions

2066

15

1

B-2

DC Parameters

Per GROUP A, SUB-GROUP 3

Notes 2, 3

Solderability

All terminals

2026

Temperature Cycling

10 cycles, T max =-fl75°C

1052

Thermal Shock

T . =—70°C

min

T = + 100°C

5 cycles, 1 minute at each extreme

1056

Moisture Resistance

Transfer time = 5 sec. max.

Omit initial conditioning

1021

15

1

Electrical End Points

Per GROUP A, SUB-GROUP 3

Notes 2, 3

FAILURE CRITERIA

"1” Input Current

10X Initial Value

“1" Output Voltage

±20% Initial Value

"0" Input Current

±20% Initial Value

“0" Output Voltage

±0.1 V

Expansion Node Current (as applicable)

±20% Initial Value

B-3

DC Parameters

Per GROUP A, SUB-GROUP 3

Notes 2, 3

Shock

1500 g; 5 blows ea. x,, y,, z,; 0.5 msec.

2016

Vibration Fatigue

30 g; non-operating

2046

15

1

Vibration, Var. Freq.

30 g;

2056

Acceleration

30,000 g; 1 min. ea. x |( y,, z,,

2006

Electrical End Points

Per GROUP A, SUB-GROUP 3

Notes 2, 3

FAILURE CRITERIA

Same as B-2

Group B Inspection shown in Table III is a complete environmental
series in accordance with MIL-S-19500 and MIL-STD-750. These tests
are performed once in every 28-day manufacturing period on a pro¬
duction lot of a representative circuit type. The circuit type selected
each period is changed routinely and is representative of all struc¬
turally similar devices produced on the same line by the same
processes during that period. A summary of these test results is
available on request at the time of order placement.

Group C tests (Table IV) are intended to verify design parameters
that are not specifically measured in Group A or B but are guaran¬
teed by consideration of related measurements in those two series.
These tests are performed every 90 days on at least one lot of every
circuit type produced during that period.

For those with ultra-high reliability requirements, an additional
preconditioning series, including operating burn-in and X-Ray, appli¬
cable to every circuit to be shipped, is available at extra cost.
Details are given under Optional Preconditioning Series (Table V).

•Systematic Uniformity and Reliability Evaluation

13

SUB¬

GROUP

TEST

CONDITIONS

MIL-STD-750

METHOD

LIMITS

LTPD

MAX. ACCEPTANCE
NUMBER

B-4

Terminal Strength
Hermeticity

Small Leak

Large Leak

Test Condition E; weight = 4 oz.

Per MIL-STD-202, Method 112C
Condition C; Procedure Ilia
Condition A; Ethylene Glycol

2036

25 x 10- 8 cc/sec. max.

15

1

B-5

Salt Atmosphere

1041

15

1

B-6

DC Parameters

Storage Life

Electrical End Points
FAILURE CRITERIA

Per GROUP A, SUB-GROUP 3

1000 hours at T min =+175°C

Per GROUP A, SUB-GROUP 3

Same as B-2

1031

Notes 2, 3

Notes 2, 3

A=15

B-7

DC Parameters
Operating Life

Electrical End Points
FAILURE CRITERIA

Per GROUP A, SUB-GROUP 3

1000 hours at T min = + 125°C;

Dynamic operation at 100 Kc.

Per GROUP A, SUB-GROUP 3

Same as B-2

1026

Notes 2, 3

Notes 2, 3

o

t—H

II

TABL E IV —GROUP C, DESIGN TESTS

SUB¬

GROUP

TEST

CONDITIONS

LIMITS

AQL

INSPECTION

LEVEL

C-l

DC Parameters

Note 1

Note 2

1.0%

11

C-2

AC Parameters

Note 1

Note 2

1.0%

11

OPTIONAL PRECONDITIONING SERIES

The following PRECONDITIONING SERIES is recommended for
special applications in which the need for very high reliability out¬
weighs consideration of incremental costs and delivery time. This
series is applied after the normal GROUP A acceptance tests. Circuits
subjected to this PRECONDITIONING SERIES are clearly distinguish¬
able from standard products in the following ways:

1) Individual serial number on each circuit.

2) Lids are painted red.

TABLE V —OPTIONAL PRECONDITIONING SERIES

3) Prefix to part number is RE rather than SE.

4) Individual device variable parameter test data supplied
with each shipment.

A minimum order of 100 pieces (mixed types if desired) is re¬
quired for the OPTIONAL PRECONDITIONING SERIES. Consult your
local representative for price information. Delivery may require 2 to
3 weeks longer than for standard product. Device types should be
specified with RE prefixes.

TEST

CONDITIONS

MIL-STD-750

METHOD

LIMITS

AQL

Visual Inspection

2071

100%

DC Parameters

Per GROUP A, SUB-GROUP 3; Record Data

Notes 2, 3

100%

Thermal Shock

T =—70°C

min

1056

100%

T = + 100°C

max 1

5 cycles; 1 minute at each extreme

Transfer time = 5 sec. max.

Mechanical Shock

1500 g; 5 blows y,; 0.5 msec.

2016

100%

Visual Inspection

2071

100%

Capacitor Stress

24 hours; T min = + 125°C; DC Condition

Note 4

100%

Operating Burn-In

36 hours; T min = + 125°C;

1026

100%

Dynamic operation at 100 Kc.

Centrifuge

30,000 g, y.

2006

100%

Hermeticity

Per MIL-STD-202, Method 112C

100%

Small Leak

Condition C, Procedure Ilia

25 xlO- a cc/sec.

Large Leak

Condition A, Ethylene Glycol

DC Parameters

Per GROUP A, SUB-GROUP 3; Record Data

Notes 2, 3

100%

Apply failure criteria

from TABLE III, SUB-GROUP B-2

X-Ray

Per MIL-STD-202, Method 209

100%

Visual Inspection

2071

100%

1. All test equipment calibrated to meet requirements of MIL-Q-9858A and MIL-C-45662A.

2. Detailed tests, conditions, and limits applicable to each sub-group are given in data sheet ELECTRICAL CHARACTERISTICS table.

3. These specific tests are used to determine Electrical End Points as required in GROUP B and in OPTIONAL PRECONDITIONING SERIES.

4. Applicable only to device types incorporating MOS capacitors.

14

AUTHORIZED SIGNETICS REPRESENTATIVES

AND DISTRIBUTORS

DOMESTIC DISTRIBUTORS AND REPRESENTATIVES

NEW YORK

Compar Albany, 419 Central Avenue, Albany 6, New York

Phone: (518) 436-8536; TWX: (710) 441-8224

ALABAMA

Compar Albany, 530 Verna Drive, Endwell, New York

Compar Southern, 904 Bob Wallace Ave. f Room 114, Huntsville, Alabama

Phone: (607) 723-8743

Phone: (205) 539-8476; TWX: (205) 533-1426

Compar Albany, 570 French Road, Depew, New York

Phone: (716) 684-5731

ARIZONA

Compar New York, 730 Clifton Avenue, Clifton, New Jersey

Compar Rocky Mountain, 84 West 1st Street, Scottsdale, Arizona

Phone: (201) 471-6090; TWX: (710) 484-4815

Phone: (602) 947-4336; TWX: (602) 949-0182

Terminal Hudson Electronics (Distributors), 236 West 17th St., New York, N. Y.

Phone: (212) 243-5200; TWX: (710) 581-3962

CALIFORNIA

Compar Los Angeles, 434 West Colorado Blvd., Glendale, California

NORTH CAROLINA

Phone: (213) 245-1172; TWX: (910) 497-2277

Compar San Francisco, 1817 Bayshore Highway, Burlingame, California

Compar Southern, 1106 Burke St., Winston Salem, North Carolina

Phone: (919) 724-0750; TWX: (919) 725-6493

Phone: (415) 697-6244; TWX: (910) 375-3388

OHIO

Jack Pyle Company, 1611 Borel Place, San Mateo, California

Compar Ohio, P. 0. Box 4791, Fairview Park, Ohio

Phone: (415) 349-1266; TWX: (710) 374-2354

Phone: (216) 333-4120

Wesco Electronics, 2620 E. Walnut Street, Pasadena, California

Compar Ohio, 16 South Broad Street, Fairborn, Ohio

Phone: (213) 684-0880; TWX: (910) 588-3274

Wesco Electronics, 3973 East Bayshore Road, Palo Alto, California

Phone: (513) 878-2631

Phone: (405) 968-3475

PENNSYLVANIA

Philadelphia (SEE HADDONFIELD, NEW JERSEY)

COLORADO

Western Pennsylvania (SEE COMPAR OHIO, FAIRBORN)

Compar Rocky Mountain, 3600 S. Lincoln St., Denver (Englewood), Colorado

TEXAS

Phone: (303) 789-2418; TWX: (303) 789-2418

Compar Southwest, 8609 Northwest Plaza Blvd., Dallas 18, Texas

Phone: (214) EM 3-1526; TWX: (910) 861-4249

CONNECTICUT

Compar Southwest, 7007 Gulf Freeway

Compar New England, 2341 Whitney Avenue, Hamden, Connecticut

P. 0. Box 12583, Houston, Texas

Phone: (203) 288-9276; TWX: (203) 772-0439

Phone: (713) 649-5756

WASHINGTON AND OREGON

DISTRICT OF COLUMBIA

Compar Northwest, 6133 Maynard Ave. So., Seattle, Washington

(SEE BALTIMORE, MARYLAND)

Phone: (206) 725-7800

FLORIDA

Compar Florida, P. 0. Box 13109, Orlando, Florida

SIGNETICS SALES OFFICES

Phone: (305) 855-3964; TWX: (305) 841-3302

Eastern Regional Sales Office, 591 North Avenue, Wakefield, Massachusetts

Phone: (617) 245-8200; TWX: (617) 245-8367

ILLINOIS

Metropolitan New York Sales Office, 129 W. Mount Pleasant Avenue

Compar Chicagoland, 6322 N. Milwaukee Avenue, Chicago 46, Illinois

Livingston, New Jersey

Phone: (312) 775-5300; TWX: (910) 221-0999

Phone: (201) 992-3980

Semiconductor Specialists, Inc., 5700 West North Avenue, Chicago, Illinois

Middle Atlantic Sales Office, P. 0. Box 254 Collingswood, New Jersey

Phone: (312) 622-8860; TWX: (910) 221-1333

Phone: (609) 858-2864

Upper New York State Sales Office, 11 Maxwell Court, Syracuse, New York

Phone: (315) 469-5112

1 MARYLAND

Southeastern Sales Office, 3267 San Mateo, Clearwater, Florida

Compar Chesapeake, Pikesville Professional Building, 7 Church Lane

Baltimore 15, Maryland

Phone: (813) 726-3734; TWX: (810) 866-0437

Phone: (301) 484-5400; TWX: (301) 484-1840

Mid-Western Regional Sales Office, 212 Skyline Drive, Barrington, Illinois

Phone: (312) 463-5105

MASSACHUSETTS

Western Regional Sales Office, 120 South Lasky Drive, Beverly Hills, California

Compar New England, 246 Walnut Street, Newtonville 60, Massachusetts

Phone: (213) 272-9421; TWX: (213) 273-8273

Phone: (617) 969-7140; TWX: (617) 332-2687

Northwestern Sales Office, 811 East Arques Avenue, Sunnyvale, California

Phone: (408) 738-2710; TWX: (910) 339-9220

MICHIGAN

Compar Chicagoland, 19831 Purling Brook, Box 122, N. E. Station, Livonia, Mich.
Phone: (313) 476-5758

SIGNETICS INTERNATIONAL SALES OFFICES

FRANCE, GERMANY, ITALY, BELGIUM, HOLLAND, LUXEMBOURG, SPAIN

MINNESOTA

Sovcor Electronique, 11, Chemin de Ronde, Le Vesinet, (S.-&-0.) France

Compar Twin Cities, P. 0. Box 8095, Minneapolis, Minnesota

UNITED KINGDOM, IRELAND, SWEDEN, DENMARK, NORWAY,

Phone: (612) 922-7011

SWITZERLAND, AUSTRIA, PORTUGAL

Electrosil Ltd., Lakeside Estate, Colnbrook-By-Pass

MISSOURI

Slough, Buckinghamshire, Great Britain

Compar Ozark, 2573 Woodson Road, St. Louis 2, Missouri

AUSTRALIA

Phone: (314) 428-5313

Corning, 1202 Plaza Building, Australia Square, Sydney, N.S.W.

Phone: 27-4318; TWX: “CORNGLAS” Sydney

NEW JERSEY

CANADA

Compar Philadelphia, 15 Potter Street, Haddonfield, New Jersey

Corning Glass Works of Canada, Ltd., Leaside Plant, Ontario, Canada

Phone: (609) 429-1526; TWX: (609) 429-9088

Phonef (416) 421-1500; TWX: (610) 491-2155

NEW MEXICO

ISRAEL

Compar Rocky Mountain, 2125 San Mateo, N. E., Albuquerque, New Mexico

Optronix, P. 0. Box 195, Ramat-Gan, Israel

Phone: 724-437

Phone: (505) 265-1020; TWX: (910) 989-1659

\

I

I

CC-21 Copyright 1966

Printed in U.S. A.